自动捕捉平衡系数试验电流工具设计

在电梯平衡系数传统测量方法中,存在电梯轿厢和对重平衡点难以判断、人为因素导致测量误差偏大、测量不准导致效率低等问题,为解决这些问题,设计出一款基于光电传感器和霍尔传感器的电流自动捕捉工具,除能够高效准确识别电梯轿厢和对重平衡点的位置外,还能通过无线信号传输处理,利用钳形电流表精确捕捉平衡点位置的电流值。经测试使用,该工具系统消除了在平衡系数测量过程中捕捉电流值的人为因素影响,并解决了无机房不能准确判断平衡点问题,有效的提高了检验工作的准确性和效率。     

兴隆庄煤矿生态系统服务价值评估

以兖州矿区兴隆庄煤矿为例,基于1990-2018年间的遥感影像数据,从供给、调节、支持和文化4个方面对兴隆庄生态系统服务价值进行测算评估,并分析其动态变化度及敏感性。评估结果表明,总生态服务价值表现为先增加后减少,1990-2010年矿区生态系统服务总价值从18841.5万元增加至29034.2万元,主要原因是采煤塌陷导致耕地向塌陷水体转变以及林地面积的增加;2010-2018年生态总价值减少了2484.8万元,主要在于耕地大规模地转变为建设用地以及区域地下水位下降造成的水域面积减小。敏感性分析显示,耕地和水体是平原矿区生态系统服务价值最敏感的因素,耕地的敏感性指数由1990年的0.79降为2018年的0.28,说明其在生态服务价值中的影响逐年降低。     

前和煤业东胶带运输大巷钻孔卸压围岩控制技术

为有效解决前和煤业3#煤层东胶带大巷在原有锚网索支护下围岩变形量大的问题,结合巷道变形特征,确定采用钻孔卸压技术,采用理论分析和数值模拟的方式确定卸压钻孔在修巷作业前,垂直于巷帮打设,钻孔深度为8 m,结合巷道的具体条件确定巷道采用卸压钻孔+让压支护的围岩控制方案,并采用矿压监测验证支护效果。结果表明:支护方案实施后,顶底板和两帮的最大移近量分别为141 mm和132 mm,有效解决了巷道两帮及底板鼓起量大的问题,保证了巷道围岩的稳定性。     

会计信息质量的非线性模型对公司价值的影响

从时代性、行业性及人力资源价值等方面分析了非线性因素对会计信息质量的影响,认为高质量的会计信息应该反映公司价值,并尝试建立了一个非线性模型,据此大体测算公司价值。     

矿山工程建设项目造价管理信息系统设计

为提高矿山工程建设项目造价管理水平,设计了矿山工程建设项目造价管理系统。通过分析矿山工程项目的造价组成,并采用三层B/S架构设计系统硬件框架,运用Web服务器传输矿山工程项目各项数据,划分系统功能子系统,并对矿山工程建设项目造价额与价差预备费进行计算,完成系统软件设计。结果表明,该系统能够有效管理矿山工程建设项目造价,并对外部的恶意攻击进行及时报警,系统具有有效性与安全性。     

Attitude-behaviour dissonance regarding the importance of food preservation for customers

The aim of the study was to identify the importance of individual food product attributes (the use of preservatives, processing method, shelf-life period and nutritional value) as well as their relation to the purchase behaviour. To achieve this, consumer preferences were decomposed in conditions of full access to information, and data was compared with actual consumer behaviour related to making purchasing decisions in front of the store shelf. Based on data from 338 respondents, conjoint analysis and repeated ANOVA measurements were carried out, allowing to eliminate individual behavioural patterns. The results showed a dissonance between the consumers attitudes towards the attributes and their shopping behaviour. The processing method was the most important declared attribute for consumers, meanwhile this information was the least searched for during purchase. At the same time, shelf-life period marked as the least important was the main information searched for by consumers when shopping. The results also show a clear dislike towards the use of microwaves as a preservation method, while traditional thermal preservation was marked as the most positive for consumers. In addition, consumers were classified into 3 heterogeneous groups, identifying differences in the preferences of food attributes. The obtained results have practical value relating not only to the preferences of individual attributes, but also to their various variants. The results can be a guide for companies to properly label food products. The indicated dissonance illustrates the educational gap and related insufficient motivation to get to know the product before buying it. This is extremely important in connection with technological development and new food processing methods.     

Benchmark value determination of energy efficiency indexes for coal-fired power units based on data mining methods

The operational optimisation of coal-fired power units is important for saving energy and reducing losses in the electric power industry. One of the key issues is how to determine the benchmark values of the energy efficiency indexes of the units. Therefore, a new framework for determining these benchmark values is proposed, based on data mining methods. First, the energy efficiency key performance indicators (KPIs) associated with the net coal consumption rate (NCCR) were selected based on the domain knowledge. Second, the decision-making samples with minimal NCCR were acquired with the fuzzy C-means (FCM) clustering algorithm, and the corresponding clustering centres were employed as the benchmark values. Finally, based on the support vector regression (SVR) algorithm, the target values of the NCCR were obtained with the KPIs as input, and the energy saving potential was evaluated by comparing the target values with the historical values of the NCCR. An actual on-duty 1000 MW unit was taken as study unit, and the results show that the energy saving potential is remarkable when the operators adjust the KPIs based on the calculated benchmark values.     

汽车悬架球头拉杆冷成形技术

为提高生产效率、改变原来通过车削加工汽车悬架球头拉杆的方式,提出了一种球头拉杆的多工位冷镦成形工艺。基于DEFORM-3D软件建立了有限元模型,对球头拉杆的塑性成形过程进行了仿真,研究了预成形凸模入模角α、预成形凹模圆角R1、终成形凹模圆角R2以及终成形凹模入模角β等工艺参数对球头拉杆成形的影响,并进行了正交试验,以模具在球头拉杆成形过程中所受载荷及工件损伤值为优化目标,获得了合理的工艺参数组合。结果表明:在保证工件成形质量及模具寿命的前提下,当预成形凸模入模角α为30°、预成形凹模圆角R1为12 mm、终成形凹模圆角R2为3 mm、终成形凹模入模角β为60°时,模具载荷及工件损伤有显著的降低。采用优化后的参数进行试模生产,工件成形质量较好,验证了模拟结果的可信性,能够有效地指导工艺设计人员的设计工作。     

Unsteady free convection of second‐grade nanofluid with a new time‐space fractional heat conduction

The Caputo and Caputo–Fabrizio derivative are applied to study a second‐grade nanofluid over a vertical plate. A comparative analysis is presented to study the unsteady free convection of a second‐grade nanofluid with a new time–space fractional heat conduction. The governing equations with mixed time–space fractional derivatives are non‐dimensionalized and solved numerically, and a comparison between the Caputo and the Caputo–Fabrizio models is made. It is found that the temperature is higher for the Caputo–Fabrizio fractional model than the Caputo model, but the higher velocity only exists near the vertical plate for the Caputo–Fabrizio model than the Caputo model. Moreover, the velocity for the Caputo model will exceed the Caputo–Fabrizio model as y evolves.     

氟橡胶的红外光谱研究

采用红外(IR)光谱,包括一维红外光谱、二阶导数红外光谱、四阶导数红外光谱和去卷积红外光谱对氟橡胶(FKM)的分子结构进行了研究。试验发现:氟橡胶的红外吸收模式主要包括CH2不对称伸缩振动模式(νasCH2-FKM)、CH2对称伸缩振动模式(νsCH2-FKM)、CH2弯曲伸缩振动模式(δCH2-FKM)、CF2不对称伸缩振动模式(νasCF2-FKM)、CF2对称伸缩振动模式(νsCF2-FKM)和CFCl伸缩振动模式(νCFCl-FKM)等。研究发现:氟橡胶的去卷积IR光谱的谱图分辨能力要优于相应的一维IR光谱、二阶导数IR光谱和四阶导数IR光谱。此研究拓展了IR光谱在氟橡胶结构及应用研究的范围。